ShreePrati logoShreePrati
Converters

Pressure Converter

Convert between pressure units — pascals, kilopascals, bars, psi and atmospheres.

1 bar equals

14.503768 psi

How it works

Enter a pressure value, choose your units and get the result instantly — useful for tyre pressure (psi ⇄ bar) and weather readings (hPa/mmHg).

Common conversions

1 bar = 100,000 pascals ≈ 14.5 psi, and 1 atmosphere = 101,325 pascals ≈ 760 mmHg.

Units you can convert

The converter covers six units. Each one is stored as a fixed number of pascals, and every result is worked out from those values:

  • Pascal (Pa): 1 Pa
  • Kilopascal (kPa): 1,000 Pa
  • Bar (bar): 100,000 Pa
  • Pound per square inch (psi): 6,894.76 Pa
  • Standard atmosphere (atm): 101,325 Pa
  • Millimetre of mercury (mmHg): 133.322 Pa

How the result is calculated

Your value is multiplied by the size of the starting unit in pascals, then divided by the size of the target unit in pascals: result = value × from-unit ÷ to-unit. For 32 psi to bar that is 32 × 6,894.76 ÷ 100,000, which shows as 2.206323.

Results are rounded to at most six decimal places and trailing zeros are removed. The psi and mmHg values are themselves rounded, so a few round trips are not perfectly exact: 1 atm shows as 760.0021 mmHg rather than exactly 760. The difference is far smaller than any tyre gauge or blood pressure monitor can measure.

Step by step

  1. Type the pressure you want to convert. Decimals are accepted.
  2. Choose the unit you are converting from.
  3. Choose the unit you want the answer in. The result updates as you type.
  4. Use the swap button to reverse the direction without retyping.
  5. Copy the result, or reset to go back to 1 bar to psi.

Worked examples

  • A tyre placard of 32 psi is 2.206323 bar, or 220.63232 kPa.
  • A European placard of 2.2 bar is 31.90829 psi.
  • 4.5 bar from a pressure washer spec is 65.266956 psi.
  • 1 atm is 14.695943 psi.
  • A blood pressure reading of 120 mmHg is 15.99864 kPa.
  • 1 kPa is 0.145038 psi.

Gauge pressure, hectopascals and other details

Tyre gauges and most pump dials show gauge pressure, which is the pressure above the surrounding air. A tyre at 32 psi on the gauge is really about 46.7 psi in absolute terms, because roughly 14.7 psi of atmospheric pressure is already there. The converter changes units only; it does not add or remove atmospheric pressure, so convert gauge readings to gauge readings.

Weather maps use hectopascals (hPa) or millibars, which are the same size: 1 hPa = 100 Pa. There is no hPa option, so divide a hectopascal reading by 10 and enter it as kPa. A typical sea-level reading of 1013 hPa becomes 101.3 kPa, which is about 1 atm.

Torr, inches of mercury (inHg), megapascals and kgf/cm² are not included on this page.

Frequently Asked Questions

Car tyres are usually measured in psi (pounds per square inch) or bar. This converter handles both.

Related Tools