WiFi Speed Test
Test your internet connection with real data transfer. Measures download speed, upload speed, ping and jitter directly in your browser.
Ready to test
The test transfers real data between your device and our server to measure download speed, upload speed and ping.
- Ping
- — ms
- Download
- — Mbps
- Upload
- — Mbps
Results depend on your device, Wi-Fi signal, other traffic on your network and the distance to the nearest server, so repeat the test a few times for a fair picture. For the most accurate reading, pause downloads and video streams first.
What this test measures
The test transfers real data between your browser and this site's own measurement endpoint, then divides the bytes transferred by the time they took. Download is how quickly data reaches you, upload is how quickly you can send data out, and ping is the round-trip delay of a single empty request. Nothing is estimated or simulated — if a measurement cannot complete, you get an error rather than a number.
How to use
- Close other downloads, video calls and streaming so they do not compete for bandwidth.
- Select Start test. Latency is measured first, then download, then upload.
- Watch the live figure while each stage runs, then read the final ping, download and upload results.
- Select Test again to repeat the measurement — a couple of runs give a fairer picture than a single one.
Features
- Download, upload and ping measured from real byte transfer.
- Jitter and the exact amount of data used shown alongside the results.
- A live speed reading while each stage is running.
- Payload sizes ramp up gradually, so slow connections still finish and fast connections are not under-reported.
- Works on mobile and desktop browsers, with no plugin or app.
Getting a fair reading
Your result reflects the whole path between your device and the measurement server, so Wi-Fi signal strength, the age of your router, other devices on the same network, VPNs and the physical distance to the nearest server all affect it. Testing over a cable, or standing closer to the router, will usually show what your connection is really capable of. A single result also isn't the whole story: ping and jitter matter more than raw speed for calls and gaming.
How each number is calculated
- Ping: six empty requests are sent one after another. The first is discarded because it also pays for setting up the connection, and the lowest of the remaining round-trip times is reported as your ping.
- Jitter: the standard deviation of those same round-trip times — how far they spread around their average.
- Download: the test streams payloads of 1, 2, 4 and then 8 MB. The clock starts when the first byte arrives, so server response time is not counted as transfer time, and the stage stops after about eight seconds of transferring.
- Upload: random bytes are generated in your browser and sent in payloads from 0.5 MB up to 4 MB. Only bytes the server confirms it received are counted.
- Speed = bits transferred ÷ seconds taken ÷ 1,000,000, shown in Mbps.
Reading your results
Download and upload are shown in megabits per second (Mbps). File sizes are usually in megabytes, and one byte is eight bits, so divide by 8 to estimate how fast files arrive: 80 Mbps is about 10 MB per second, enough to download a 1 GB file in under two minutes.
Ping and jitter are in milliseconds (ms). As a rough guide, a ping below 20 ms feels instant in games, 20–50 ms is good for most online activity, and above 100 ms you may notice lag on video calls. Jitter under about 30 ms keeps voice and video smooth. The amount of data used by each stage is listed with the results.
If the test is slow or fails
- If an error appears instead of a result, check that you are still online, then run the test again.
- VPNs, proxies and some browser extensions can slow or block the measurement requests — pause them and compare the result.
- Restart the router if speeds are far below normal on every device.
- On dual-band routers, the 5 GHz network is usually faster at short range, while 2.4 GHz reaches further through walls.
- Compare a Wi-Fi result with a wired test: if the cable is much faster, the problem is the wireless signal, not your plan.